532 Green Laser-35W
Tlhaloso ea sehlahisoa
E koahela 35w ka matla a laser a nang le bophara bo bokhutšoane ba pulse (<25ns@50K), boleng bo holimo ba beam (M²<1.2) le boleng bo phethahetseng ba letheba la laser (beam circularity>90%). E nepahetse bakeng sa ho tšoaea likhalase, ho tšeloa filimi e tšesaane le kalafo ea bokaholimo. bakeng sa boholo ba litšepe le lisebelisoa tse seng tsa tšepe, tse kang ho tlosa lera la oxide ho tloha holim'a tšepe
Litšobotsi tsa laser
1. 532nm output wavelength, 10 ho 200 Hz sekhahla sa ho pheta-pheta;matla a laser ke 35w;Tokiso e tsoelang pele ea sekhahla sa ho pheta-pheta ha ho ntse ho bolokoa matla a ho otla a sa khaotseng, ho bonts'a maballo a holimo le botsitso ba matla ho etsa hore Setsebi khetho ea pele bakeng sa micromachining, ho tšoaea le lits'ebetso tse tšesaane tsa ho tlosa lifilimi.
2. Boleng bo ikhethang ba marako (M²<1.2) ，bo tiisitsoe ka ho feletseng litekanyetsong tsohle tsa ho pheta-pheta;hoo e batlang e le khutšoanyane pulse bophara <25ns@50K e nang le mocheso o fokolang oa mocheso ho lintho tse potolohileng;boleng bo phethahetseng ba lebala (Beam Circularity>90%)
Haufi le profil ea boreleli ea Gaussian e nang le boleng bo tlase M² <1.2 le ho tsepamisa maikutlo hantle ho molemo bakeng sa lits'ebetso tse joalo ka
3. Theknoloji e ikhethang ea Q-switching, e ikamahanya le litlhoko tse fapaneng tsa taolo ea lisebelisoa tsa laser;Khatholoho ea Marang-rang bakeng sa thekenoloji e kopanyang ea harmonic;Tsamaiso e babatsehang ea nako e telele ea matla a matla a maholo a tiisitsoeng, boholo bo kopanetsoeng haholo, bo bonolo ebile bo tiile.
4. Theknoloji ea taolo ea dijithale bakeng sa mokhanni, sebopeho sa taolo sa RS232 se netefatsa taolo e bonolo le ho kopanngoa le lisebelisoa tsa ho tšoaea laser.
5. Laser ena e amohela moralo o le mong oa setaele o nang le sebopeho se kopaneng le se utloahalang, ho kenya habonolo.
Ho bonolo ho tsamaisa le ho boloka sebaka ka lebaka la moralo o monyane le o bobebe
Pholiso ea metsi, thekenoloji e bolokang chelete e ngata le e tšepahalang ea ho pompa le moralo oa DPSS o se nang amplifier o netefatsa ts'ebetso e bonolo le ho hokahanya ho kenya le litšenyehelo tse tlase tsa tlhokomelo.
6. Theknoloji ea taolo ea ts'ebetso ea tlhahiso ea indasteri, e fana ka lihlahisoa tse tsitsitseng tsa boleng.
Boholo ba sebopeho
Pontšo e felletseng ea dijithale, e tšehetsang puisano le komporo, e khonang ho laola remoutu ea laser
| Mohlala No. | GT-R532-35W | |
| Laser wavelength,nm | 532 | ditaelo |
| Kakaretso ea Matla a Output, W | >35 | @50kHz |
| Pulse Width,ns | <25 | @50kHz |
| Sekhahla sa Pheta-pheta ea Pulse, kHz | 20-200 |
|
| Mokhoa oa Sebaka | TEMoo |
|
| (M2) | <1.2 |
|
| Beam Diameter,mm | 1.0±0.2 | E lekantsoe ka fensetere |
| Beam Full Divergence Angle, mrad | <1.2 |
|
| Beam Circularity,% | >90 |
|
| Pulse-to-Pulse Stability,% | <2 | RMS/@30kHz |
| Karolelano ea Botsitso ba Matla,% | <3 | RMS/8hr |
| Beam-Pointing Drift,μrad/℃ | <30 |
|
| Polarization karo-karolelano | > 100:1 |
|
| Boikutlo ba Polarization | E tshekaletseng |
|
| Mocheso oa Ts'ebetso.& RH | 10 ho isa ho 35℃ |
|
| <80% | ||
| Mocheso oa polokelo.& RH | - ho tloha ho 20 ho isa ho 65℃ |
|
| <90% | ||
| Tlhokahalo ea Motlakase | 100-240 VAC | Mokhahlelo o le mong |
| 50/60Hz | ||
| Tšebeliso ea Matla | <500W | |
