532 Green Laser-10W
Tlhaloso ea sehlahisoa
E koahela 5w/10w ka matla a laser a nang le bophara bo bokhutšoane ba pulse (<14ns@30K), boleng bo holimo ba beam (M²<1.2) le boleng bo phethahetseng ba matheba a laser (beam circularity >90%).E loketse ka ho khetheha bakeng sa ho cheka le ho ngola ka li-ceramics, ho tšoaea, ho seha le ho cheka ka likhalase le li-wafer le kalafo ea holim'a lintho tse ngata tsa tšepe le tse seng tsa tšepe.
Litšobotsi tsa laser
1. 532nm output wavelength, 10 ho 200 Hz sekhahla sa ho pheta-pheta;matla a laser ke 5w / 10W;Tokiso e tsoelang pele ea sekhahla sa ho pheta-pheta ha ho ntse ho bolokoa matla a ho otla a sa khaotseng, ho supa boriti bo phahameng le botsitso ba matla ho etsa khetho e ntle ea pele bakeng sa micromachining, ho tšoaea le lits'ebetso tse tšesaane tsa ho tlosa lifilimi.
2. Boleng bo ikhethang ba marako (M²<1.2) ，bo tiisitsoe ka ho feletseng litekanyetsong tsohle tsa ho pheta-pheta;hoo e batlang e le khutšoanyane pulse bophara <14ns@30K e nang le mocheso o fokolang oa mocheso ho lintho tse potolohileng;boleng bo phethahetseng ba lebala (Beam Circularity>90%)
Haufi le profil ea boreleli ea Gaussian e nang le boleng bo tlase M² <1.2 le ho tsepamisa maikutlo hantle ho molemo bakeng sa lits'ebetso tse joalo ka
3. Theknoloji e ikhethang ea Q-switching, e ikamahanya le litlhoko tse fapaneng tsa taolo ea lisebelisoa tsa laser;Khatholoho ea Marang-rang bakeng sa thekenoloji e kopanyang ea harmonic;Tsamaiso e babatsehang ea nako e telele ea matla a matla a maholo a tiisitsoeng, boholo bo kopanetsoeng haholo, bo bonolo ebile bo tiile.
4. Theknoloji ea taolo ea dijithale bakeng sa mokhanni, sebopeho sa taolo sa RS232 se netefatsa taolo e bonolo le ho kopanngoa le lisebelisoa tsa ho tšoaea laser.
5. Laser ena e amohela moralo o le mong oa setaele o nang le sebopeho se kopaneng le se utloahalang, ho kenya habonolo.
Ho bonolo ho tsamaisa le ho boloka sebaka ka lebaka la moralo o monyane le o bobebe
Pholiso ea metsi, thekenoloji e bolokang chelete e ngata le e tšepahalang ea ho pompa le moralo oa DPSS o se nang amplifier o netefatsa ts'ebetso e bonolo le ho hokahanya ho kenya le litšenyehelo tse tlase tsa tlhokomelo.
6.Theknoloji ea taolo ea tlhahiso ea tlhahiso ea indasteri, e fana ka lihlahisoa tse tsitsitseng tsa boleng.
Boholo ba sebopeho
Pontšo e felletseng ea dijithale, e tšehetsang puisano le komporo, e khonang ho laola remoutu ea laser
| Mohlala No. | GT-R532-10W | |
| Laser wavelength,nm | 532 | ditaelo |
| Kakaretso ea Matla a Output, W | >10 | @30kHz |
| Pulse Width,ns | <10 | @30kHz |
| Sekhahla sa Pheta-pheta ea Pulse, kHz | 20-200 |
|
| Mokhoa oa Sebaka | TEMoo |
|
| (M2) | <1.2 |
|
| Beam Diameter,mm | 0.8±0.1 | E lekantsoe ka fensetere |
| Beam Full Divergence Angle, mrad | <1.2 |
|
| Beam Circularity,% | >90 |
|
| Pulse-to-Pulse Stability,% | <2 | RMS/@30kHz |
| Karolelano ea Botsitso ba Matla,% | <5 | RMS/8hr |
| Beam-Pointing Drift,μrad/℃ | <30 |
|
| Polarization karo-karolelano | > 100:1 |
|
| Boikutlo ba Polarization | E otlolohileng |
|
| Mocheso oa Ts'ebetso.& RH | 10 ho isa ho 30℃ |
|
| <80% | ||
| Mocheso oa polokelo.& RH | - ho tloha ho 20 ho isa ho 65℃ |
|
| <90% | ||
| Tlhokahalo ea Motlakase | 100-240 VAC | Mokhahlelo o le mong |
| 50/60Hz | ||
| Tšebeliso ea Matla | <500W | |
