355nm e kopantsoeng ea UV laser-8w
Tlhaloso ea sehlahisoa
e koahela 4W/6W/8W ka matla a laser a nang le bophara bo bokhutšoane ba pulse (<20ns@30K), boleng ba boleng bo holimo (M²<1.2) le boleng bo phethahetseng ba letheba la laser (boleng circularity >90%).K-6 series laser e nepahetse bakeng sa ts'ebetso e phahameng ea boemo bo holimo hammoho le ho tšoaea khetla ea mohala oa thekeng, sephutheloana sa litlolo, lijo, meriana le lisebelisoa tse ling tse phahameng tsa polymer, PCB, LCD, bokaholimo ba glassware, lisebelisoa tsa tšepe, likonopo tsa polasetiki. , karolo ea elektroniki, mpho, sesebelisoa sa puisano, thepa ea kaho le libaka tse ling.
Litšobotsi tsa laser
1. 355 nm output wavelength, 10 ho 200 Hz sekhahla sa ho pheta-pheta;matla a laser ho tloha ho 4w/6w/8w;Tokiso e tsoelang pele ea sekhahla sa ho pheta-pheta ha u ntse u boloka matla a ho otla a sa khaotseng, ho bonts'a marang-rang a phahameng le botsitso ba matla ho etsa khetho ea pele bakeng sa micromachining, ho tšoaea le ho tlosa lifilimi tse tšesaane.
2. Boleng bo ikhethang ba maballo (M²<1.2) , e tiisitsoe ka ho feletseng litekanyetsong tsohle tsa ho pheta-pheta;bophara bo bokgutshwane ba ho otla ha pelo<20ns@30K e nang le mocheso o fokolang oa mocheso ho lisebelisoa tse potolohileng;boleng bo botle ba letheba (Beam Circularity>90%)
Haufi le boemo bo boreleli ba Gaussian bo nang le boleng bo tlase ba M²<1.2 le ho tsepamisa maikutlo ho hotle ho molemo bakeng sa lits'ebetso tse kang
3. Theknoloji e ikhethang ea Q-switching, e ikamahanya le litlhoko tse fapaneng tsa taolo ea lisebelisoa tsa laser;Khatholoho ea Marang-rang bakeng sa thekenoloji e kopanyang ea harmonic;Tsamaiso e babatsehang ea nako e telele ea matla a matla a maholo a tiisitsoeng, boholo bo kopanetsoeng haholo, bo bonolo ebile bo tiile.
4. Theknoloji ea taolo ea dijithale bakeng sa mokhanni, sebopeho sa taolo sa RS232 se netefatsa taolo e bonolo le ho kopanngoa le lisebelisoa tsa ho tšoaea laser.
5. Laser ena e amohela moralo o le mong oa setaele o nang le sebopeho se kopaneng le se utloahalang, ho kenya habonolo.
Ho bonolo ho tsamaisa le ho boloka sebaka ka lebaka la moralo o monyane le o bobebe
Pholiso ea metsi, thekenoloji e bolokang chelete e ngata le e tšepahalang ea ho pompa le moralo oa DPSS o se nang amplifier o netefatsa ts'ebetso e bonolo le ho hokahanya ho kenya le litšenyehelo tse tlase tsa tlhokomelo.
6.Theknoloji ea taolo ea tlhahiso ea tlhahiso ea indasteri, e fana ka lihlahisoa tse tsitsitseng tsa boleng.
Boholo ba sebopeho
Pontšo ea dijithale e felletseng, e tšehetsang puisano le komporo, e khonang ho laola remoutu ea laser
| Mohlala No. | GT-R355-8W | |
| Laser wavelength,nm | 355 | ditaelo |
| Karolelano ea Matla a Output,W | >8 | @30kHz |
| Pulse Width,ns | <20 | @30kHz |
| Sekhahla sa Pheta-pheta ea Pulse,kHz | 10-200 |
|
| Mokhoa oa Sebaka | TEMoo |
|
| (M2) | <1.2 |
|
| Beam Diameter,mm | 0.8±0.1 | E lekantsoe ka fensetere |
| Beam Full Divergence Angle,mrad | <1.2 |
|
| Beam Circularity,% | >90 |
|
| Pulse-to-Pulse Stability,% | <3 | RMS |
| Karolelano ea Botsitso ba Matla,% | <5 | RMS/8hr |
| Beam-Pointing Drift,μrad/℃ | <25 |
|
| Polarization karo-karolelano | > 100:1 |
|
| Boikutlo ba Polarization | E tshekaletseng |
|
| Mocheso oa Ts'ebetso.& RH | 10 ho isa ho 35℃ |
|
|
| <90% |
|
| Mocheso oa polokelo.& RH | - ho tloha ho 20 ho isa ho 65℃ |
|
|
| <90% |
|
| Tlhokahalo ea Motlakase | 100-240 VAC | Mokhahlelo o le mong |
|
| 50/60Hz |
|
| Tšebeliso ea Matla | <500W | |
